FOTOPAD SETUP NOTES

Installing IpAD

To open remove 6 knobs on back of unit

Place ipad into opening

Install cords, battery etc

Place foam insert on back of ipad

Turn on the guest attraction led by moving the tiny switch on the black battery unit

Replace cover

Install 6 knobs, first loosely to allow the cover to “float” between the knobs, then tighten all

Camera

Place FotoPad face down but elevate the Fotopad with some item like a box, several cups, etc. elevating it will allow you to insert the camera thru the camera opening

Remove the pre installed ¼ inch bolt with a 7/16 inch wrench

Insert the camera thru the hole and position so that it is centered and install the ¼ inch bolt into the camera tripod screw hole

Adjust the camera for straightness as you tighten the bolt

LightPad

Lightpad mounts on the camera hot shoe

Wire coming out of the lightpad is attached to the matching wire/switch assembly to be able to turn it on and off

Velcro strips included to allow you to position and mount the switch in a convenient spot on the back of the PhotoPad

Other items included

Extra back knob

Ipad interface for camera and power adapter

COMING SOON - VIDEO ON SETUP OF FOTOPAD